Flammability Tester
Product Details:
X
Product Description
Flammability Tester
S.K digiFLAME (Digital Flammability Tester) is made of STAINLESS with a fine Acrylic door, which opens upwards. The PANEL housing all the controls is at Lower Front portion of the Unit.
| Flame source | : | L.P Gas. |
| Gas cylinder & Regulator | : | General. |
| Gas Pipe | : | 1.5 Meters. |
| Power Supply | : | 220V AC, 50 Hz, 1- |
| Multipurpose Gauge | : | 16 mm, 19 mm, 8 mm. |
| Platform size of Brushing Unit | : | 175 mm (L) x 105 mm (W) ( 2 mm) |
| Movement of platform | : | Manually operated by bearing wheels. |
| Brushing Unit Dimensions | : | 375 mm (L) x 120 mm (W) x 140 mm (H) |
| Specimen cutting template | : | 150 mm x 50 mm |
| Flame length | : | 16 mm |
| Height Adjustment of flame | : | 19 mm |
| Burner specimen distance | : | 8 mm |
| Specimen holder receiver tray position | : | 45 Angle w.r.t base |
| Equipments Door | : | Acrylic made, Open upward |
| Door size | : | 335 mm x 335 mm |
| Digital timer | : | 0 - 99.9 Sec. , L/C : 0.1 Sec. |
| Test Time | : | Depends upon the test specimen/procedure |
| Size of sample holder | : | 175 mm x 80 mm |
| Burning area | : | 105 mm x 40 m |
| Main Unit Dimensions | : | 365 mm (L) x 280 mm (W) x 570 mm (H) |
| 14 (L) x 11 (W) x 22.5 (H) Inch. |
STANDARD ACCESSORIES digiFLAME (Digital Flammability Tester) is supplied complete with below accessories. | ||
| Main Unit | : | 01 No. |
| S.S. Brushing Device Unit | : | 01 No. |
| Empty Cylinder | : | 01 No. |
| Gas Regulator | : | 01 No. |
| Fine Cutting Scissors | : | 01 No. |
| Marking Pen (For Specimen Template) | : | 01 No. |
| S. Specimen Holders | : | 05 Set. |
| Dead Weight for Hanging | : | 01 No. |
| Gas Pipe for Cylinder (1.5 Meter) | : | 01 No. |
| Multi-Purpose Gauge to measure flame (S.S) | : | 01 No. |
| S.S. Clamps for fixing gas pipe | : | 02 Nos. |
| Clamps for holding the specimen | : | 10 Nos. |
| Clamps for Brushing Device | : | 02 Nos. |
| Mercerised cotton reel No. 50 (As Per Standard) | : | 01 No. |
| Specimen Cutting Template (50 x 150 mm) | : | 01 No. |
| Standard Transparent Tape Roll | : | 01 Roll. |
| Calibration Certificate (Traceable to NPL) | : | 01 No. |
| Inspection & Conformance Certificate | : | 01 No. |
| Detailed User's Manual | : | 01 No. |
STANDARDS ASTM D1230 94 (Re approved 2001), FTMS 191 – 5908, CRF 16 – 1610, CALIF TB 117 NFPA 702 | ||
Other Products in 'Textile Testing Equipments' category
S. K. EQUIPMENTS
Plot No. C-305, 1st Floor, Sector 10,Noida - 201301, Uttar Pradesh, India
Key Personnel
Mr SHEERAZ KHAN
(Proprietor)
|
